Spectrum 4
Service Equipment
Product Navigator
FUEL INJECTOR CLEANER TESTER /
ULTRASONIC
MODEL –PIR-0402 PIR-0402U
Details
- It is advanced electromechanical product, which can clean and test Auto engine injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle.
- Uniformity/Spray ability test: To test the uniformity of injecting amount of each injector, and to monitor the spraying status of each injector with the lighting of backlight.
- Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.
- Injecting flow test: To check the injecting volume of the injector in fixed time of constant injection.
- Auto test: To test injectors by simulating different working conditions.
- On-vehicle cleaning: The unit is equipped with various adaptors and couplers that facilitate cleaning on the injectors on vehicle.
- Ultrasonic cleaning: (OPTIONAL) To perform simultaneous cleaning on several injectors, to remove the carbon deposits on the injector completely.
Technical Specifications
|
Mains Supply |
220VAC, 50HZ, 1 Ph ±10% |
|
|
Test Cylinder |
4 Cylinder |
|
|
Flow of Fuel System |
4L/min |
|
|
Ultrasonic Wave Frequency |
38-39KHz |
|
|
Ultrasonic Wave Power |
100W |
|
|
Simulated RPM Range |
0～9975rpm; step: 25rpm; |
|
|
Time Range |
1～9975s, Step: 5s |
|
|
Pulse Width |
0～30ms; step 0.1 ms |
|
|
Count |
0～9975s, Step:25r |
|
|
Time |
0～9975s Step 5s |
|
|
System Pressure |
0-6.2 kg/cm² (Variable regulated) |
|
|
System Flow |
4L/min |
|
|
Test Cylinder: |
4 (Max) |