Body Shop Equipment
Pulsar
Product Navigator
UNIVERSAL BENCH TYPE
COLLISION REPAIR SYSTEM
MODEL – PBB-PL15
Salient Features
- Proven Technology – Bench on Scissors type Collision Repair System.
- Slim Frame; Thickness only 115mm with lift.
- Drive-over bench – Fastest mounting time.
- Bench frame equipped with arms to lift vehicle without clamping.
- Puller equipped with down-pull facility.
- Puller: both movements in horizontal directions.
- Lift equipped with remote and additional controller on control panel.
- Supplied with standard set of pulling clamps.
Compact and robust high lifting table lift, with great pulling force, Dozer with 10T ram and compatible with Electronic Measuring Systems
Fast and Easy "Vehicle Set-up
115 mm Minimum thickness of frame with lift included
Fast and easy vehicle setup
Lifting of the car to the appropriate height by means of the arms and adjustable supports 1700 mm- Maximum lifting height of table
Robust holding of vehicle on Bench with Strong Siel Clamps and Easy approarch for repair from all sides
The Perfect Choice For "Fast Repair"
FAST CLAMPING
ATTACHMENT OF PULLER
State Of Art Dozer With 10 Ton Pulling Capacity
Dozer arm with 2 articulations and 2 sets of holes
The mounting of the articulated puller is quick and can be attached anywhere around the bench
The Dozer can be positioned all around the vehicle Dozer positionable at 360° with down pull facility
Technical Specifications
|
Lifting Capacity |
3000 Kg |
|
|
Lifting Time |
55 Sec |
|
|
Lowering Time |
50 Sec |
|
|
Total Weight |
1370 kg |
|
|
Noise Level |
70 dB(A)/1m |
| Dimensions | ||
|---|---|---|
|
Length of Frame |
3700 mm |
|
|
Width of Frame |
770 mm |
|
|
Maximum Height |
1700 mm |
|
|
Minimum Height |
115 mm |
Electrical Specifications
| MOTOR | ||
|---|---|---|
|
Electric Motor Power |
3,0 Kw |
|
|
Voltage |
3ph. 230-400V trif.+/-5% |
|
|
Frequency |
50 Hz |
|
|
Amperage |
230V : 13,6 A |
|
|
|
400V : 7,8 A |
|
|
Number of wires |
3 |
|
|
Speed |
1380 rpm |
Composition
1. Bench on Lift 2. Pulling Chain 10 T, 3. Vertical Support Assembly, 4. Power Unit, 5. Wheel Pallets, 6. Dozer, 7. Hydraulic Cylinder 10T, 8. Hydraulic Pump, 9. Mounting Arms 10. Dozer Extension 11. Safety Cable.
Options
1. Tool Hanging Board, 2. Pull Strap -10T, 3. Chain Shortner, 4. Multi Hole Pull Plate, 5. Universal Pull Clamp, Universal MC Pherson Strut Pulling Kit , 7. Pulling Clamp Right Angle, 8. Pulling Clamp 10T.
Space Requirement
